Download Guide de l'utilisateur

EN
Cyclocomputer Settings
Bike Select
Use the setting below to change the bike being used.
Setting Item
(Bike name)
Description
Change the bike being used. The device can have up to six bikes registered to it.
•• If the bike is changed, the registered sensor setting will also change automatically. When you change the bike, make sure that the
sensor is connected with the device.
Wi-Fi Settings
Configure Wi-Fi settings, such as switching the Wi-Fi
connection and adding an access point.
1 On the home screen, tap the [Settings] icon.
This displays the settings menu.
2 Tap [Wi-Fi Settings].
•• Tap [Scan] to reload the list.
•• The device is compatible with the WEP and WPA/WPA2
PSK standards.
•• The device is not compatible with the LAN stealth functions
of routers and access points. Routers and access points in
stealth mode do not appear on the device’s connection list.
•• The device cannot connect to access points that require you
to enter account information in an internet browser.
4 Tap the access point you want to add.
This displays network information. Input the password
and other required information, and then tap [Connect] to
start connecting.
3 Tap the [Wi-Fi] check box.
The Wi-Fi function is turned on and scanning for an
access point starts.
A list appears when access points are found.
Settings
44