Download Hurricane 1000 Quick Reference Guide Rev. 1 Multi

Hurricane™ 1000 QRG
EN
Remote Connector
Fluid Level
Indicator
Manual Fog
Button
Product Overview
Back Panel
View
Fuse Holder
Power
Cord
AC Power
This product has a fixed voltage power supply and it can work with an input
voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific
model.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Fuse 1. Disconnect the product from power.
Replacement 2. Twist the fuse holder cap counterclockwise to loosen the fuse holder and
pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact
same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes.
Mounting
Clamp
Mounting
Bracket
Safety Cable
Product
Mounting
Diagram
Safety Loop
Nozzle
Bracket Adjustment Knob
3
Feet for Floor
Mounting