Download LCD-A15V/U LCD

Transcript
Let’s Install
Mounting on an Arm
It is possible to remove the pedestal and mount the monitor on a fixture
device such as an arm conforming to the VESA standard. Prepare an arm
and appropriate screws for mounting the monitor on the arm.
Caution!
・Please be extra careful while mounting the monitor on the arm, taking care not
to drop the liquid crystal display monitor on the floor or damage the panel.
・Place a soft cloth underneath so that the liquid crystal display monitor is
not damaged.
・Turn off the power supply and remove the cable before starting to work.
・Please refer to the instruction manual of the fixture device you have prepared.
Remove all the covers from the rear of the device.
Remove the pedestal.
Remove screws (four locations).
Remove screws
(four locations).
locations).
22