1
Download Two-Wheel Tractor 3400, 3400KL Operating Instructions
Transcript
5. Maintenance 6 (2 h) 25 h 100 Nm 6 (2 h) 50 h 100/160 Nm Drive-Wheels When commissioning the tractor and each time you change wheels, check and tighten wheel bolts and nuts after the first 2 operating hours with 100 Nm (10 kpm). Proceed likewise when doing maintenance work. After the first two operating hours and after every 50 operating hours, retighten the hex nuts (A/22; C/22) on the hub adapters to 100 Nm and the nuts (E/23; G/23) on the wheel hubs to 160 Nm. Check tyre air pressure regularly. For smooth 6 50 h driving, make sure that there is the same pressure in front and rear tyres respectively. Battery There is no dry pre-charge of batteries on new machines or trailers, therefore batteries must be totally charged after filling them with accumulator acid (charge current = 1/10 of battery capacity). If the machine or trailer will not be used for a long period, the battery must be kept fully charged with a current of 0.06A and checked every 4 weeks and recharged, if necessary. 5 Before recharge, disconnect negative pole - otherwise there is a risk of damage to the electronics! W Never leave battery in uncharged state! Note manufacturer’s instructions! Avoid sparking and open flames near batteries. Careful when handling battery acid! Only use specified circuit breakers. If circuit breakers are too strong, the electric system will be destroyed danger of fire! 74 agria Two-Wheel Tractor 3400; 3400 KL
