Download User Manual User Manual

Maintenance
EN
2
1
Replacing the battery
If the Geberit urinal flush control is supplied
with electricity by batteries, they must be
replaced after approx. two years.
A skilled person can be hired to replace the
batteries, or the user or operator can
perform this task themselves, by carrying
out the following work steps.
3
Maintenance tools
2
• Torx® inner profile key in size 2
• Screwdriver in size 3
3
Replacing the batteries
Prerequisites
Two replacement batteries (type 1,5 V
Mignon /AA/LR6/AM-3) are ready.
1
2 mm
4
1
2
90º
5
1
2
B1082-001 © 08-2013
966.133.00.0 (01)
13