Download TMS320C55x Assembly Language Tools User's Guide
Transcript
Assembler Error Messages R5003 ’C54x does not modify ARn, but ’C55x does Description This message occurs when both memory operands of an ADD or SUB instruction use the same ARn register but only the second operand modifies the register. For example: SUB Action *AR3, *AR3+, A On ’C54x, such an instruction will not modify AR3 by adding one to it. On ’C55x, the same instruction will add one to AR3.This difference in behavior may or may not affect your code. To prevent this message from being issued, move the ARn modification to the first operand: SUB *AR3+, *AR3, A R5004 Port of RETF correct only for non-interrupt routine. C-18 Description This message occurs when the assembler encounters RETF and RETFD, the ’C54x fast interrupt return instructions. Because it is possible to correctly use these instructions in non-interrupt routines, the RETF instruction is mapped to the ’C55x RET instruction. Action If this instance of RETF or RETFD is actually used to return from an interrupt, you need to consider the issues described in R5005, and then rewrite this instruction using the ’C55x RETI instruction.
Related documents
TMS320C55x Assembly Language Tools User's Guide (Rev. H)
"Fixed-Point DSP Assembly Language Tools User's Guide"
MSP430 Assembly Language Tools v 3.1 User's Guide (Rev. C
TMS320C6000 Assembly Language Tools User's Guide
TMS320C54x Assembly Language Tools User's Guide
TASKING VX-toolset for RH850 User Guide
TMS320C55x Optimizing C/C++ Compiler User's Guide
"TMS320C3x/C4x Assembly Language Tools User's Guide"
Processor Debugging Through Ethernet
Hammond Organ Service Manual - Early Models (A,B,C series, B3
TMS320C55x Optimizing C/C++ Compiler
"Configuring Code Composer Studio for