Download Installation and Operating Instructions

IntelliPoint RF RML Series
Installation
2.8 Sensing Element Connection (continued)
For IntelliPoint RF instruments that are mounted
remotely from the sensing element, the cable
connections from the sensing element to the electronic unit
are made to the terminals on the sensing element side of
the housing. See Figure 2-8. Connect Green (Ground) wire
to green screw, Red (Shield) wire to red screw, and Blue
(Center) wire to blue screw.
3 TERMINAL PROBE (TYP)
Shield Wire
(RED)
Housing and
Bracket are
shown rotated
90º for clarity.
GSC
G=Ground
S=Shield
C=Center
Center Wire
(BLUE)
Ground Wire
(GREEN)
2 TERMINAL PROBE (TYP)
Center Wire
(BLUE)
Shield Wire
(CLIPPED)
Ground Wire
(GREEN)
SHIELD WIRE MUST BE CLIPPED BY USER
CLIPPED SHIELD WIRE MUST NOT TOUCH CONDULET HOUSING
Figure 2-8
Sensing Element Connection
(Remote Housing)
13