Download Installation and Operating Instructions

Installation
2.6 Spark (Static Electricity) Protection
Spark protection is a standard feature of the sensing element
circuit.
Spark Protection for Remote Sensing Elements
If additional spark protection is supplied for a remote sensing
element, use the installation instructions provided with the
spark protection. Below are instructions for our most common
spark protector, Part # 377-0001-019.
A.Attach the mounting link on the spark protector to the
sensing element center connection screw.
B.Connect the green wire from the spark protector to the
ground screw.
C.Feed the coax cable into the condulet.
D.Connect the coax cable center wire (cw) to the spark
protector and the ground wire (gnd) to the ground screw
as shown in Figure 2-9.
E.Connect the shield wire to the Cote-Shield terminal
(sh).*
* For sensing elements that do not have shield connections,
clip the shield wire as shown in Figure 2-8.
Figure 2-9
Spark Protection for
Remote Sensing Elements
17