Download USER'S MANUAL

③ The display will be transformed and the lamp of the presser
foot Up/Down(
) will be lit when you press the pedal
forwardly by a stage.
↓
④ The display will be changed and the ready lamp for sewing
(
) and the lamp of the presser foot Up/ Down(
) will be
lit when you press the pedal forwardly up to the 2 stage.
↓
⑤ The display will be changed and the ready lamp for sewing
(
) and the On/Off (
) lamp of knife motion will be lit
when you press the pedal backwardly.
↓
⑥ The test end will be displayed when you pressing the
READY(
) key and then it will carries out the function of
machine origin point and transform to the initial display for
test automatically.
7) Auxiliary output test (Aux. Out Test)
① Select‘7’using the UP, DOWN key on the initial display for
test, and then press the ENTER key.
OR
↓
② The display will be transformed and the ready lamp for
sewing(
) will be lit when you press the ENTER key. And
if you will press the ENTER key again, the ready lamp for
sewing(
) will be turned off.
↓
(
③ The test end will be displayed when you pressing the
READY(
) key and then it will carries out the function of
machine origin point and transform to the initial display for
test automatically.
80
)
↓
(
)
↓