Download User Manual

w
www.foscam.com
Enable: Run ActiveX controls and plug-ins
Figure 7.6
If you allow the ActiveX running, but still could not see living video. Please change another port number to try.
Don’t use port 88.
Figure7.7
NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could
not see video, please shut down firewall or anti-virus software to try again.
7.1.7 Can
Can’’t access IP camera in internet
There are some reasons:
1、ActiveX controller is not installed correctly
2、The port which camera used is blocked by Firewall or Anti-virus software. Please change another port
number and try again. (Figure7.7)
3、Port forwarding is not successful(Figure4.30)
Check these settings and make sure they are correct.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
96
96