Download USER MANUAL - D-Link

Section 3 - Configuration
Time and Date
Click on the Time and Date button to access the settings from the left side of the Setup menu.
Time zone: Used to adjust the hour of time servers
for local settings.
Enable Daylight Saving: Select this checkbox to enable daylight
saving time.
Daylight Saving Dates: Set daylight saving time start and end
date by your local definition.
Enable NTP Server: Synchronize with the NTP server over the
Internet whenever the DCS-5605/5635
starts up. It will fail if the assigned time
server cannot be reached.
NTP server Used: Assign the IP address or domain name
of the time server. Leaving the text
box blank will let the DCS-5605/5635
connect to default time servers.
Update interval: Used to adjust the hour of time servers
for local settings. The time interval for
the camera to update the time settings
from a NTP server.
Set the date and time
manually: Adjust the date and time according to what is selected by the administrator.
Copy Your Computer’s time Synchronize the date and time of DCS-5605/5635 with your local computer. The date and time of the PC is
Settings: displayed and updated in the DCS-5605/5635.
D-Link DCS-5605/5635 User Manual
54