Download 1 - ipen.br

-
6.2
89 -
Graphical Output Features
The plot routines have been set up to produce:
(a)
quality contours
(b)
velocity vectors
(c)
mass flux vectors
for any planes of interest.
Quality contour values are specified by TCON in the input deck.
Up to 15 contour intervals are allowed.
If less than 15
contours are desired, then set the remaining position of the
TCON array to zero and the plotting subroutine ignores them.
Velocity vectors are determined by first interpolating each
velocity component to the grid nodes.
The two velocity
component? lyli.% in the plane of interest are added vectorlally.
The resultant vector is printed as an arrow with its length
indicating magnitude ?nd angle indicating direction.
Mass flux
contours are determined by multiplying the velocity vector
calculated earlier by the local density.
Two plotting formats are available to the user:
(a)
(b)
Full Diameter/Horizontal Cut Composite
Vertical Cut Composite
Full Diameter/Horizontal Cut Composite
This composite includes plots of values of the K-2 and K-N
planes which lie next to the line of symmetry.
out by the plot routine automatically.
These are put
Included on this frame