Download POLLUTEv7 User's Guide

Monte Carlo Simulation
Variable Type: This is the type of data for which the user wishes to enter a probability distribution. There
are 6 types of data that can be used:
Initial Source Concentration: This is the Initial Source Concentration of the top boundary, and can
only be used if the top boundary condition is NOT zero flux.
Darcy Velocity: This is the Darcy Velocity of the model.
Layer Thickness: This allows the user to specify a distribution for the thickness of a layer. The user
will be asked to specify the layer for which to vary the thickness.
Diffusion Coefficient: This is the Diffusion Coefficient of a layer, the user will be asked to specify
the layer for which to vary the Diffusion Coefficient.
Distribution Coefficient: This is the Distribution Coefficient of a layer, the user will be asked to
specify the layer for which to vary the Distribution Coefficient. If the layer selected is fractured the
distribution coefficient along the fracture will be varied.
POLLUTEv7 Reference Guide
128