1
Download Mbug User's Guide
Transcript
mm mm Memory Modify Word mm mm mm address start + start - end Memory modify is an interactive command. It will display the contents of the given memory address and allow the user to change the value stored there. Memory is considered to be a contiguous set of 32-bit integers. Addresses must be word aligned. The “plus” form causes the command to start at a given address and continue until the end of memory or until the user types “x” to exit the memory modify loop. The “range” form allows modifications for the inclusive range from start to end. When the end address is reached the memory modify loop is automatically exited. The user can type “x” at any time to exit the memory modify loop. Examples: Mbug >> memod 50100 0x00050100 : 0x89898989 : ? 44444444 Mbug >> memod 50110-50118 0x00050110 : 0x89898989 : ? 0x00050114 : 0x89898989 : ? 0x00050118 : 0x89898989 : ? 11111111 22222222 33333333 Mbug >> memod 50200+ 0x00050200 : 0x89898989 : ? 0x00050204 : 0x00000000 : ? 0x00050208 : 0x00000000 : ? 12341234 12341234 x Mbug >> memod 50240-50270 0x00050240 : 0x00000000 : ? 0x00050244 : 0x00000000 : ? 0x00050248 : 0x00000000 : ? 2133a234 ffdfaddf x Mbug >> MOTOROLA Mbug Version 1.6 User’s Guide -27
