1
Download Mbug User's Guide
Transcript
mdb mdb Display Memory Byte mdb mdb mdb address start + start - end This command will display memory as 16 bytes per line of output. If the “range” form is used and it exceeds 16 words then memory display will enter interactive mode. In interactive mode, the user needs to type <return> to continue or “x” to exit. The start address is normalized to the previous quad-word boundary. Likewise, the ending address is normalized to the next quad-word boundary. For example, if the start address was 0x00000104 then the first memory address to be displayed would be 0x00000100. If the end address was 0x00000104 then the last location to be displayed would be 0x0000010C. The “plus” form will cause the command to enter interactive mode and display memory in 16-word blocks from a given start address and continue until the user types “x”. Note that the above parameter forms can be combined by separating the forms with a comma or whitespace. This will display multiple portions of the memory space with one command. Examples: Mbug >>mdb 1000,3000 0x00001000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mbug >>mdb 2000-2040 0x00002000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00002010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00002020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00002030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00002040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mbug >>mdb 3000+ 0x00003000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 mdb >> 0x00003040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 mdb >>x 0x00003080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00003090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x000030a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x000030b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 MOTOROLA Mbug Version 1.6 User’s Guide ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ ................ -23
