Download User's Guide - 4 Office Technical Support

Transcript
paper curl 293
paper frequently jams 287
print job takes longer than
expected 272
tray linking does not work 272
unexpected page breaks 273
printer
configurations 10
finishing features 86
moving 235, 236
shipping 236
printer configurations 10
printer control panel 14
adjusting brightness 59
factory defaults, restoring 239
printer hard disk
disposing of 218
encrypting 221
installing 31
removing 36
troubleshooting 286
printer hard disk encryption 221
printer information
where to find 9
printer messages
1565 Emulation error, load
emulation option 269
31.xx Missing or Defective [color]
cartridge 262
32.xx [color] cartridge part number
unsupported by device 262
34 Incorrect paper size, open
[src] 262
35 Insufficient memory to support
Resource Save feature 262
37 Insufficient memory for Flash
Memory Defragment
operation 263
37 Insufficient memory to collate
job 263
37 Insufficient memory, some Held
Jobs were deleted 263
38 Memory full 263
39 Complex page, some data may
not have printed 263
40 [color] invalid refill, change
cartridge 263
51 Defective flash detected 263
52 Not enough free space in flash
memory for resources 264
54 Network [x] software error 264
54 Serial option [x] error 264
54 Standard network software
error 264
55 Unsupported option in slot
[x] 264
56 Parallel port [x] disabled 265
56 Serial port [x] disabled 265
56 Standard parallel port
disabled 265
56 Standard USB port
disabled 265
56 USB port [x] disabled 265
57 Configuration change, some
held jobs were not restored 265
58 Input config error 266
58 Too many bins attached 266
58 Too many disks installed 266
58 Too many flash options
installed 266
58 Too many trays attached 266
59 Incompatible output bin
[x] 267
61 Remove defective disk 267
62 Disk full 267
80.xx Fuser life warning 267
80.xx Fuser missing 267
80.xx Fuser near life warning 267
80.xx Replace fuser 267
82.xx Replace waste toner
bottle 268
82.xx Waste toner bottle
missing 268
82.xx Waste toner bottle nearly
full 268
83.xx Replace transfer
module 268
83.xx Transfer module life
warning 268
83.xx Transfer module
missing 268
840.01 Scanner disabled by
admin 269
840.02 Scanner disabled. Contact
system administrator if problem
persists. 269
88.xx [Color] cartridge critically
low 269
88.xx [color] cartridge
low 268, 269
88.xx [color] cartridge nearly
low 268
Adjusting color 252
Index
331
an error has occurred with the flash
drive 252
an error has occurred with the USB
drive 252
Change [input src] to [custom type
name] load [orientation] 253
Change [src] to [custom
string] 253
Change [src] to [custom string]
load [orientation] 253
Change [src] to [custom type
name] 253
Change [src] to [size] 254
Change [src] to [size] [type] 254
Change [src] to [size] [type] load
[orientation] 254
Change [src] to [size] load
[orientation] 254
Check [src] orientation or
guides 255
Close [tray] door 255
Close finisher side door 255
Close finisher top cover 255
Close front door 255
Close left side door 255
Close paper transport cover 255
Close top access cover 255
Disk corrupted 255
Disk near full. Securely clearing
disk space. 256
Disk problem 256
Empty the hole punch box 256
Fax partition inoperative. Contact
system administrator. 256
Fax server 'To Format' not set up.
Contact system
administrator. 256
Fax Station Name not set up 257
Fax Station Number not set
up 257
Insert hole punch box 257
Insert staple cartridge 258
Insert Tray [x] 258
Install bin [x] 257
Install Tray [x] 257
Load [src] with [custom
string] 258
Load [src] with [custom type
name] 258
Load [src] with [size] 258
Load [src] with [type] [size] 258