Download User Manual

Transcript
12 RECLINER
5.
Pressing firmly, attach the fastening strips of the new/existing headrest pillow to the fastening strips on the back of the headrest upholstery.
Headrest Upholstery
Fastening Strips
Strap
Strap
Headrest Pillow
FIGURE 2 Replacing the Headrest Pillow
12.3 Replacing the Headrest/Back Upholstery

For this procedure, refer to FIGURE 3 on page 70.
Headrest Upholstery
1.
Remove the headrest pillow. Refer to Replacing the Headrest Pillow on page 68.
2.
Remove the six mounting screws that secure the headrest upholstery to the headrest extension tubes.
3.
Secure new headrest upholstery onto headrest extension tubes with the existing six mounting screws.
4.
Install headrest pillow. Refer to Replacing the Headrest Pillow on page 68.
Back Upholstery
1.
Disengage one side of the spreader bar. Refer to Removing/Installing the Spreader Bar on page 71.

To remove and install the bottom two mounting screws of the back upholstery the wheelchair MUST be partially folded.
Refer to Folding/Unfolding the Wheelchair on page 22.
Part No. 1110550
69
Invacare® Tracer® SX5 Wheelchair