Download User Guide

User Guide
Expression Pedal
Since any number of parameters can be programmed to respond to the
pedal, it’s important to learn how to un-assign parameters. Let’s say that
you’ve programmed the Pedal to control Mix from 50% to 100% and
Delay from 10 milliseconds to 100 milliseconds. Now, you’d like to unassign Delay and have it fixed at 20 milliseconds rather than have it
change when the Pedal moves. Here’s what you do:
1)
2)
Press the Pedal to full heel and turn the Delay knob to 20
milliseconds.
Press the Pedal to full toe. Turn Delay away from 20
milliseconds and then back to 20 milliseconds.
Remember, you must move the Parameter Control Knob to create the
Pedal assignment. If a Parameter was previously assigned to the Pedal,
the only way to un-assign it is to set the same value for the heel and toe
by turning the knob.
The Expression Pedal settings are not saved automatically. If you want to
be able to recall your Expression Pedal setting, you must perform the
Preset Save operation.
If you load a Preset and the Expression Pedal is not connected, the
parameter values will be same as they were the last time the Preset was
used.
36