Download Operating Instructions - OPTISWITCH 3000 C - with two-wire
Transcript
Set up 6 Set up 6.1 General The numbers in brackets refer to the following illustrations. Function/Configuration On the electronics module you will find the following indicating and adjustment elements: l l DIL switch for mode adjustment - min./max. (1) Signal lamp (4) Note: As a rule, always set the mode before starting the setup of OPTISWITCH 3000 C . If the instrument is used in conjunction with a signal conditioning instrument, always set the mode switch (1) on OPTISWITCH 3000 C to max. mode. The mode is selected on the signal conditioning instrument with the mode switch. The switching output will change if you set one of the two mode switches afterwards. This could possibly trigger other connected instruments or devices. 30061-EN-060830 16 OPTISWITCH 3000 C - with two-wire output