Download Operating Instructions

&XUUHQWRXWSXW
2XWSXWFXUUHQW
25,00 mA
20,00 mA
15,00 mA
10,00 mA
5,00 mA
0,00 mA
0%
20%
40%
60%
80%
100%
120%
0HDVXUHGYDOXH
0 - 20 (21,6) mA
4 - 20,5 mA
NAMUR
4 - 21,6 mA
Standard
&XUUHQWRXWSXWDODUP
This function allows the operator to define the state taken on by the current output when a state of alarm
is detected. This information can be analyzed in the control system. Press € to display the current setting:
Alarm
[>22mA]
As mentioned in Section 13.4.3.1 Selection window / make a selection, the operator can choose between
the following settings:
¾
¾
¾
not used
> 22 mA
< 3.8 mA
no alarm function
current rise in the case of an alarm
current reduction in the case of an alarm
.
23(5$7,1*0$18$/80)
Page 65 of 82