Download Multi-ICE Version 2.1 User Guide

Using the Multi-ICE Server
31
28 27
Version
12 11
Part Number
1 0
Manufacturer identity
1
Figure 3-10 TAP Controller Device ID register format
Note
According to the IEEE 1149.1 specification for device identifiers the value 0xF0F0 in the
Device No. field and 0x787 in the Man No. field is invalid.
ARM Limited puts these values into the device logic when the logic is supplied to the
silicon manufacturer, with the intention that it is overridden with manufacturer and
device-specific codes.
If the default ARM values are not overridden, the Multi-ICE DLL uses the string
UNKNOWN (Generic ARM) as the manufacturer. The device name and part number are
determined from the device characteristics when this is possible. When it is not possible
the device fails to autoconfigure and must be manually configured. Multi-ICE also
displays the true manufacturer number and string if this can be determined.
3.3.2
Start-up Options dialog
This section describes the parts of the Start-up Options dialog box shown in
Figure 3-11.
Figure 3-11 The Start-up Options dialog
3-16
Copyright © 1998-2001 ARM Limited. All rights reserved.
ARM DUI 0048E