Download Operating Instructions for JHV

9-2. Moved/Fixed Mold Air-Blast Set Page
Code
Status
Scope
Description
A
Set Value
ON/OFF
Press SET button to switch over.
B
Actual Value
ON/OFF
Press SET button to switch over.
C
Set Value
0-999.9 sec
Set the action time performed.
D
Set Value
0-999.9 mm
Set where position of the moved mold to perform the
air-blast action.
E
Set Value
0-99.9 sec
Set the time of air-blast action performed by the delay.
~18~