Download bdiGDB User Manual

bdiGDB for GNU Debugger, BDI2000 (XScale)
User Manual
21
3.2 Configuration File
The configuration file is automatically read by the BDI2000 after every power on.
The syntax of this file is as follows:
; comment
[part name]
identifier parameter1
identifier parameter1
.....
[part name]
identifier parameter1
identifier parameter1
.....
etc.
parameter2 ..... parameterN
parameter2 ..... parameterN
; comment
parameter2 ..... parameterN
parameter2 ..... parameterN
Numeric parameters can be entered as decimal (e.g. 700) or as hexadecimal (0x80000).
© Copyright 1997-2006 by ABATRON AG Switzerland
V 1.08