Download 2010 QR Knobs Owners Manual

Fishmaster Quick Release Knobs
Item
4 Quick Release Knobs
4 Quick Release Knobs
Description
Knobs used to replace bolts in side uprights for easy removal when folding
OR
Knobs used to replace bolts in top section for easy removal when folding
SIDE UPRIGHT INSTALLATION
Remove the bolts from the hinged area of the side uprights. Leave hinge bolt in. Replace bolts with
one Quick Release Knob in the either hole of each leg. One is adequate and the two are for
customers that never fold their T-Top down. If needed use an Allen wrench to tighten the knobs.
TOP SECTION INSTALLATION
In the center of the top section there are 3 bolts holding the two sections together remove the bolts
on the outside and replace with the Quick Release knobs. Leave the center bolt attached. If
needed use an Allen wrench to tighten the knobs.
FMSSO-V1-13Nov09
Pg 2
of 2
Copyright 2005-2009, Fishmaster, Inc.