Download RMX 1000 User Guide Version 1.1 - Support
Transcript
Chapter 9 - Conference/Participant Monitoring Parameter Description Displays the participants role or function in the conference: Role Chairperson – The participant will be defined as the conference Chairperson and will have more rights to manage conferences through the endpoint interface. Lecturer – The participant is defined as the conference Lecturer. Lecturer and Chairperson – The participant is defined as both the conference Lecturer and Chairperson. IP Address The participant’s IP address Alias Name The participant’s Alias Name Dialing Direction Dial-in – The participant dialed the conference. Dial-out – The MCU dialed the participant. Displays the status of the participant’s audio channel: If the participant’s audio connection is normal and the channel is neither muted nor blocked, no indication is displayed. Audio Muted – The selected endpoint is muted so that its audio cannot be sent to other conference sites. Blocked – The selected endpoint is blocked so that it cannot hear the audio of other conference sites. Displays the status of the participant’s video channel: If the participant’s video connection is normal and the channel is neither suspended nor secondary, no indication is displayed. Video Suspended – Video transmission from the endpoint to the conference is suspended. Secondary – Participant is connected only through the audio channel due to problems with the video channel. Encryption Indicates that the endpoint is using encryption for its connection to the conference FECC Token The participant has the Far End Camera Control (FECC) Token and is capable of conducting FECC. FECC Token can only be allocated to one participant at one time. If no partipant uses the FECC function, this icon is not displayed. Content Token The participant has the Content Token and the rights of content sharing. FECC Token can only be allocated to one participant at one time. If no partipant uses the FECC function, this icon is not displayed. Viewing Participant Properties To view detailed parameters of a participant, double-click the desired participant in the participant list, or right-click the participant, and then click Participant Properties. 9-8