1
Download FmX Integrated Display User Guide
Transcript
VRS Plugin for DCM-300 and Ag3000 Modems 19 Linking vehicles For vehicles to link using Vehicle Sync, they must have either the same Client/Farm/Field or the same Client/Farm/Field/Event: • If the event is not the same ( for example, seed bed preparation and planting in the same field) the vehicles will share guidance lines, point/line/area features, and status information but will not share coverage for the different events. • To share coverage, vehicles must have the same Client/Farm/Field/Event To assist with setting these values so that they are the same, the Field Selection page now has a Vehicle Sync button that allows you to select the settings of another vehicle if this appears in the Run screen. Do the following: 1. Click Vehicle Sync. 2. In the Nearby Vehicles screen, select the vehicle that you want to link with. 3. Click Join. This populates your screen with the same Client / Farm / Field / Event used by the vehicle you are linking with and enables the link. Note – You can also click Vehicle Sync to create a Client / Farm / Field link, but then you must rename the Event afterwards. FmX Integrated Display User Guide 19-11
