Download Installation and User's Guide

3
Hose Assembly
Assemble the hose
The unit includes twelve sections of hose, each 4 feet (4’) in length (Figure 4). Do not cut the
hose lengths. You will need to connect these 4’ sections of hose to create a combined hose length that is
at least 4’ longer than the distance from your suction source (whether
skimmer or dedicated suction line) to the farthest point in the pool
(Figure 5). Connect the hoses by twisting and pushing the female ends
Hose
onto the male ends after wetting the ends in the pool (Figure 6). A
Twelve, 4’ lengths
special “leader” hose section is designed to connect to the
cleaner’s swivel assembly and therefore has a larger hose cuff
than the other hose lengths (Figures 7 and 8). Failure to use this
Figure 4
leader hose section to attach the hose to the cleaner’s swivel assembly
will hinder your cleaner’s performance. If additional hose is needed,
use only hoses from your Pentair Water Pool and Spa dealer (order replacement part No. 41200-0131).
Use of another manufacturer’s hose will hinder cleaner coverage.
Hose
must e
qual lo
ngest
stretch
——
plus a
t least
4 feet.
Figure 5
Female hose end
Male hose end
Leader Hose
Swivel
Assembly
Figure 6
Leader Hose
Connect to Swivel Assembly
Figure 8
Figure 7
Great White Installation and User’s Guide