1
Download Elliptical User's Guide
Transcript
Assembly UNPACKING Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. Note: It is recommended that you apply grease to the threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY! Place your elliptical trainer on a level flat surface. It is recommended that you place a protective covering on your floor. E51/E52 PARTS (see illustration on previous page) • 1 Front Foot Tube • 2 Upper Handlebars • 2 Lower Handlebars/Link Arms • 2 Pedal arms • 2 Guide Rails • 1 Console Mast • 1 Console Mast Boot • 1 Power Supply (E52 model only) • 1 Tension Knob (E51 model only) • 2 Pedal Arm Sleeves • 2 Crank Boots • 2 Front Upper Handlebar Covers • 2 Back Upper Handlebar Covers • 1 Hardware Pack E53/E54HR PARTS (see illustration on previous page) • 1 Front Foot Tube • 2 Upper Handlebars • 2 Lower Handlebars • 2 Pedal arms • 2 Guide Rails • 1 Console Mast • 1 Console Mast Boot • 1 Power Supply • 1 Audio Wire (E54HR model only) • 2 Crank Boots • 2 Front Upper Handlebar Covers • 2 Back Upper Handlebar Covers • 2 Footpads • 2 Pedal Link Arms • 1 Hardware Pack TOOLS (included) • 4mm Allen Wrench • 5mm Allen Wrench/Phillips Screw Driver • 13/15mm Flat Wrench • 17mm Wrench TOOLS (included) • 4mm Allen Wrench • 5mm Allen Wrench/Phillips Screw Driver • 13/15mm Flat Wrench • 17mm Wrench If you have any questions, or if there are any missing parts, we will guarantee complete satisfaction. PLEASE CALL OUR TOLL-FREE DIRECT CUSTOMER ASSISTANCE CENTER @ 1-800-244-4192 Mon.-Fri., 8 a.m.-5 p.m. CST (excluding holidays). 8
