Download Troubleshooting Guide

Transcript
1 TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Slit Glass and Main Chargers
Follow the procedure below to clean the slit glass and the main chargers.
„ Cleaning the slit glass
1
Open the front cover of the equipment.
2
The slit glass cleaner is placed inside the front cover.
Press and release the latch of the holder to take out
the slit glass cleaner.
3
Remove the white cap.
y Do not touch the slit glass cleaner pad, because the toner on
the pad may stick to your hands and the cleaner pad may be
stained.
y Use the slit glass cleaner with its pad side facing down.
4
62
Insert the cleaner through the service hole of each
developer unit to clean the slit glass.
Cleaning the Slit Glass and Main Chargers