Download Installation and Operating Instructions

Introduction
Thank you for choosing a Kroll waste oil fired burner.
This manual will explain how to install, operate and maintain your burner.
Kroll burners can be fitted to air furnaces or heaters which push out warm air, or to boilers, to produce
hot water. It’s important that you also read the separate manual about that apparatus in conjunction with
this burner manual.
When you burn waste oil in a Kroll burner, provided you have it adjusted correctly, and attached it to a
compatible heater or boiler, it will run cleanly and reliably.
BUT, in exchange for being able to run on this free or inexpensive fuel, you have to put up with
inconvenience of some extra maintenance compared to using gas, heating oil or electricity.
If you are not prepared to carry out this extra maintenance, then, to be blunt, you have bought the
wrong burner!
We believe that in order to look after your burner, you need to have a good understanding of how it
works.
So please read through this manual.
2