1
Download Installation Manual
Transcript
90˚ Elbow using Thermobreak Tube a. To achieve 45˚ angle, use miter box or cut in an angle to achieve the outer diameter of the insulation as illustrated above b. Apply rubber based solvent adhesive to both ends c. Join both ends firmly d. Apply Thermobreak foil tape on the joints to protect against any moisture penetration
![MANUAL DON100 [00].indd](http://vs1.manualzilla.com/store/data/006095799_1-d1aaff0cf1c228ce06e57a23b8945995-150x150.png)