Download Version 2.2 User manual

7.7 Annotate points
Point annotations can be added using two buttons that are available in the Annotate
section.
Figure 57 - The Elevation and Label annotation buttons
7.7.1 Annotate with elevation
You should click the Elevation button in order to annotate points with their corresponding
elevation value. Elevation values will be extracted from the terrain and added as a label to
each point.
7.7.2 Annotate with label
You should click the Elevation button in order to annotate points with their corresponding label. Labels will be extracted from the project tree and added as a label
to each point.
7.8 Volume operations and terrain
modifications
An important part of the surveying process is the calculation of volumes. Virtual Surveyor Tools provides the capabilities to do this in a straightforward way. All necessary tools to perform these tasks are located under the ‘Volume Operations’ group
in the Virtual Surveyor Tools window (figure 58).
Figure 58 - The ‘Volume Operations’ buttons group of Virtual Surveyor Tools, grey and disabled
51