Download Minitar MVA11A VoIP ATA User Manual

MVA11A User Manual
Yes
006
002 + 003
If a prefix of either 002 or 003 is dialed,
it will be replaced by 006.
Yes
07
*
If a * character is dialed at the beginning of
a number, it will be replaced by 07.
3.8.7 Flash Time Settings
This screen allows you to set the timing parameters for Hook / Flash (a momentary break in
the phone line circuit) to activate certain functions such as switching to the other line or
placing the line on hold.
The timing parameters are set independently for the FXO and FXS ports.
The default setting will not normally need to be varied.
When you have finished the setting, click the Submit button.
The page will refresh, then click the Save button.
The changes you made will be saved into the system memory and the system will reboot
automatically.
MVA11A User Manual © 2008 Minitar Corporation
41