Download 9600 Series User Guide

System Administration: Setting the Date
21.3 Checking the Time Server Status
For systems that automatically obtain the time from a time server, this option is available in place of the Date 142 , Time
144 and Time Offset 144 functions. It allows you to check the current status of the time server and the information the
system has obtained from the time server.
1. Press the Features soft key if shown. To do this during a call, press the
PHONE key and then press the
Features soft key.
2. Use the
up and down
arrow keys to highlight Phone User. Press Select.
3. Use the
up and down
arrow keys to highlight System Administration. Press Select. If the option is not
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the
up and down
arrow keys to highlight Time Server Status. Press Select.
6. The time server information is listed. It includes the address of the time server, the current local time and the UTC
time. If the phone system is configured for daylight savings then the current amount of daylight savings being
applied to the local time is also shown.
9600 Series User Guide
IP Office
Page 143
Issue 05d (Wednesday, August 15, 2012)