Download NemaStudio User Guide

Transcript
NemaStudio User Guide
Altitude. COG and SOG and Altitude values are taken from the Object Control
Center.
DTE flag
Data terminal ready
Speed Over Ground
Speed over Ground
COG and SOG and Altitude values are taken from the Object Control Center.
The max ranges for these controls can be set in the General Settings.
In the General Settings the setting for SOG is set by default to30 knots.
If you need a higher value for a SAR you can adjust the range for the velocity
control there.
Own ship (VDO)
Assigned mode flag
Checksum
Check this if you want a checksum added to each sentence.
(c) 2015 Sailsoft
108