Download Operating Instructions Compact Stereo System

SC-HC49DBGN&GN&GS~RQT9883-B.book
4
21 ページ
２０１４年２月２１日　金曜日　午前９時２６分
Measure and mark the position of both sides of the
wall mount brackets.
6
≥ Use figures below to identify the screwing positions.
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the antenna(s) and the AC mains lead to the
unit before hanging the unit onto the wall. (l 5)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall mount
brackets.
The position to attach the wall mount brackets
13 mm
204 mm
ュモャチモワヵバ
ョヮチモワヵ
ヘブ„
Wall
Space required
300 mm
142 mm
154 mm
75 mm
142 mm
7
100 mm
5
500 mm
Drive the safety holder fixing screw (not supplied)
to secure the safety holder onto the wall.
≥ Refer to step 5 for requirements before screwing.
100 mm
Attach the wall mount bracket to both sides of the
wall with two screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
Fix to the wall
Safety holder
At least 30 mm
Safety holder fixing screw
(not supplied)
‰7.5 mm to
‰9.4 mm
8
‰4 mm
Wall mount bracket
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Cord (not supplied)
Wall
21
RQT9883