Download Operating Instructions Compact Stereo System

SC-HC49DBGN&GN&GS~RQT9883-B.book
8 ページ
２０１４年２月２１日　金曜日　午前９時２６分
Bluetooth ® transmission mode
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
≥ Press [ ] to select “BLUETOOTH”.
≥ If a Bluetooth® device is already connected,
disconnect it.
1
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2
Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Media playback controls
The following marks indicate the availability of the
feature.
[CD]:
CD audio in CD-DA format and a CD that
contains MP3 files (l 18)
[iPod]:
Compatible iPhone/iPad/iPod (l 18)
[USB]:
USB devices containing MP3 files (l 18)
[Bluetooth]: Connected Bluetooth® device
Preparation
≥ Turn the unit on.
≥ Insert the media or connect the Bluetooth® device.
≥ Press [CD/RADIO], [iPod/USB] or [ ] to select the
audio source.
≥ When using iPhone/iPad/iPod, the operation may vary
among those models.
≥ Select “MODE 1” if the sound is interrupted.
≥ The factory default is “MODE 2”.
Basic controls
([CD], [iPod], [USB], [Bluetooth])
Bluetooth ® input level
If the sound input level from the Bluetooth® device is
too low, change the input level setting.
Preparation
≥ Connect a Bluetooth® device.
1
2
Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
Press [3, 4] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
^---------------------------------------------------------J
≥ Select “LEVEL 0” if the sound is distorted.
≥ The factory default is “LEVEL 0”.
Disconnecting a Bluetooth ® device
1
While a Bluetooth® device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2
Press [3, 4] to select “OK? YES” and then press
[OK].
≥ You can also disconnect the Bluetooth® device by pressing
and holding [ -PAIRING] on the unit.
≥ The Bluetooth® device will be disconnected if a different
audio source (e.g., “CD”) is selected.
8
RQT9883
Play
Press [1/;].
Stop
Press [∫].
≥ [USB]: The position is memorised and
“RESUME” is displayed.
Pause
Press [1/;].
Press again to restart play.
Skip
Press [:/6] or [5/9] to skip
track.
[CD], [USB] Press [3] or [4] to skip the
MP3 album.
Search
During play or pause, press and hold
[:/6] or [5/9].
≥ [iPod]: Backwards search is only within the
current track.