Download Precision Piston Metering Pump mikro delta® MDLa

Operation
11.1
Manual
Personnel:
Adjusting the stroke length
n Instructed personnel
The pump may demonstrate unexpected behaviour
during operation.
–
Do not set the stroke length adjustment knob to
more than 100 %.
The stroke length is adjusted by the stroke length adjustment knob
within a range of 0 ... 100 %. A stroke length of between 4 ... 100
%) is recommended to achieve the specified reproducibility.
The following image shows the settings for two stroke length
values on the fine stroke length adjustment knob and the use of the
locking lever.
0.0 %
33.0 %
A
B
33.2 %
100.0 %
P_DE_0023_SW
Fig. 25: Adjustment examples for stroke length values: 0.00 %,
33.0 %, 33.2 % and 100.0 %. Locking lever in position A: stroke
length adjustment knob free; locking lever in position B: Stroke
length adjustment knob locked.
100 % corresponds to 5 mm stroke length corresponds to 10 rota‐
tions
Calculation example
A stroke length of 2 mm is to be set.
I.e.: 2 mm x (100% / 5 mm) = 2 mm x (20% / 1 mm) = 40 %
The following operating options are available via the keys - see the
next figure:
Stop/start pump
Stop the pump: Press the [STOP/START] key.
55