Transcript
Wall mount installation manual With this wall mount it’s easy to install your wireless network antenna to a wall. The equipped wall anchors makes wall mount installation easy. Step 1 The depth of the drill hole must be at least 35 mm deep and a diameter of 6mm. 6mm Step 2 35mm It’s possible to compensate small deviations in the drill hole positions Step 3 Nut Small ring Large ring Remove small ring of the wall anchors. Put the wall anchors in the drill holes. Place the wall mount over the tread wire of the wall anchors. Place the small ring than the big ring and finally the nut on the tread wire. Fasten the nut. The wall mount is strong enough to hold a closed dish with a max. diameter of 1 meter.