Download Sponge-Jet B-VAC User Manual

Figure B: Main Controls
_________________________________________________________________________________________________
1. Air Filter
The Air Filter is intended to protect the Air Motor and Regulator from
damage due to dirty or wet air.
2. Regulator
Regulates the airflow.
3. Lubricator
Contains oil used to disburse moisture and lubricate the Air Motor.
4. Air Inlet Valve
The Air Inlet Valve is the main air control valve that starts and stops
the airflow to the Pneumatic Media Classifier.
Figure B
5. Muffler
Located on the Air Motor.
6. 2 ½” Pressure Gauge
Measures the output pressure of the Regulator.
7. Bracket
Located on the outside of the housing. This Bracket holds the Filter,
Lubricator, Pressure Gauge and Regulator.
Sponge-Jet B-VAC User Manual – 10-February-2005
Page 51 of 55