Download ESPRIT user manual 4.4.0-2

Chapter 5
99
Parameter settings.
settings.
Figure 5 .5 – To edit the
parameter set.
set.
Figure 5 .6 – colour coded positions.
positions .
Under the parameters tab <edit>, measurement time interval, flow rate of
syringe and peristaltic pumps, and the speed of mixing can be selected (see
Fig. 5.5). Also the temperature of the water bath can be set if a water bath
has been defined under <options> - <customize> - <general>.
Four parameter sets are available. Select a parameter set and, subsequently,
define the position on the microtiter plate for the samples to go with that
parameter set. All positions belonging to the same parameter set are shown
in the same colour: Parameter set 1 gives the sample positions a yellow
colour, set 2, 3 and 4 positions show up in blue, pink and purple respectively
(Figure 5.6).