1
Download Easy GPRS User Guide
Transcript
Easy GPRS User Guide 80000ST10028 Rev. 0 - 02/01/07 Define PDP Context GPRS Context Activation Socket Dial AT+CGDCONT=1,”IP”,”ibox.tim.it”,”0.0.0.0” AT#GPRS=1 AT#SKTD=0,1024,”217.201.142.223” First you have to define PDP context filling in the information of APN in this example: ibox.tim.it. Next step is activation of GPRS context which gives as reply the IP of the module assigned by network. Now you can open the connection with the remote host with IP address 217.201.142.223 on the port 1024 (as in example). NOTE: IP of the modules can be verified with the following AT command line: AT#GPRS=1 Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 33 of 35
