Download User Guide - SISPA Sicurezza Incendio

Table of Contents
1. Introduction .......................................................................5 1.1 1.2 1.3 About the Handbook ......................................................................... 5 The Reader ....................................................................................... 5 Reference Documentation ................................................................ 5 2. General Description ..........................................................6 3. Setting up the System ......................................................7 3.1 3.2 3.3 3.4 Minimum PC-requirements ............................................................... 7 Installing the Software ....................................................................... 7 Installing the Hardware ..................................................................... 8 3.3.1 Overview ................................................................................. 8 3.3.2 Cable Connections Overview in Interface Unit WAS-2000 .... 9 3.3.3 Connecting the Loop Cable to the Loop Driver Module in
WAS-2000 ............................................................................... 10 3.3.4 Cable Connections to an AutroSafe Operating Panel ............ 11 Starting AS-2000 ............................................................................... 11 4. Operating the Tool ............................................................12 4.1 4.2 4.3 4.4 4.5 Overview ........................................................................................... 12 The ”Topology” Window .................................................................... 13 4.2.1 Select Loop Driver .................................................................. 14 4.2.2 The START Button ................................................................. 15 4.2.3 The STOP Button .................................................................... 16 4.2.4 Test LEDs Button .................................................................... 16 4.2.5 Self-Verify Test........................................................................ 18 4.2.6 The Report Button ................................................................... 19 4.2.7 The Loop Measure Button ...................................................... 20 4.2.8 The Loop Power OFF Button .................................................. 20 4.2.9 The ‘Test Break (+)’ Button ..................................................... 20 4.2.10 Comfail Bargraph .................................................................... 21 4.2.11 Status Bar ............................................................................... 21 4.2.12 Static and Dynamic Loop Unit Information ............................. 22 4.2.13 Right Clicking the Mouse ........................................................ 22 4.2.14 Notifications Button ................................................................. 24 The SMV_Curves Window ................................................................ 25 4.3.1 Selecting a Point to Watch in SMV_Curves............................ 25 4.3.2 Enabling / Disabling Drawing of a Specific Curve .................. 26 4.3.3 Enabling / Disabling SMV_Curves Function ........................... 26 The SMVGraph Window ................................................................... 27 4.4.1 SMVGraph Selector ................................................................ 27 4.4.2 Update..................................................................................... 27 4.4.3 Function Reset Min / Max ....................................................... 27 4.4.4 Function Reset All ................................................................... 27 The Setup Window ............................................................................ 28 5. List of Symbols .................................................................29 User Guide, Loop Diagnostic Tool AS2000, Interactive Fire Detection Systems 116-P-ASAFE-AS/FGB Rev. H, 2012-06-15,
Autronica Fire and Security AS
Page 3