Download Operating Instructions - CNET Content Solutions

Chapter 4 Settings - [Setting] menu
[Setting] menu
1 COMPUTER
2
On the menu screen, selectCOMPUTER
[Setting]
from
the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
fAfter
f
selecting the item, pressVIDEO
as to set.
MEMORY VIEWER/
USB DISPLAY
ENTER
MENU
ASPECT KEYSTONE INFO.
FREEZE AV MUTE P-TIMER LAMP
IMAGE
D.ZOOM VOLUME MUTE DAYLIGHT
VIEW
[On start]
Set the method of start up when the power cord plugged into the AC outlet.
1) Press as to select [On start].
2) Press the <ENTER> button.
3) Press as to switch the item.
ff The items will switch each time you press the button.
[Off]
[On]
Starts up in the standby mode.
Starts the projection immediately.
Note
ff When you do not turn off the projector in procedure of “Powering Off the Projector” (x page 36), the On start function will
not work properly.
[Standby mode]
Set the power consumption during standby. Change the setting whether or not use the network function.
1) Press as to select [Standby mode].
2) Press the <ENTER> button.
3) Press as to switch the item.
ff The items will switch each time you press the button.
[Eco]
[Normal]*1
Restricts some functions in the standby mode to reduce power consumption.
Does not restrict network function and serial communication function even in the standby mode.
*1 For PT-TX210, it cannot restrict the serial communication function even in the standby mode.
Note
ff If [Standby mode] is set to [Eco], you cannot use network functions and some RS-232C commands.
[High land]
Change the setting according to the altitude in which you use the projector.
1) Press as to select [High land].
2) Press the <ENTER> button.
3) Press as to switch the item.
ff The items will switch each time you press the button.
[Off]
When using the projector in the elevation of below 1 400 m (4 593').
[On]
When using the projector in the elevation of above 1 400 m (4 593') and below 2 700 m (8 858').
ENGLISH - 55