Download Operating Instructions - CNET Content Solutions

Chapter 4 Settings - [Expand] menu
[Off]
Test pattern is not displayed.
[Gray scale 1]
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
Select a test pattern so that it is easy to make various adjustments.
[Green]
[Blue]
[Cross hatch]
[White]
[Black]
[Raster gray]
4) Press the <ENTER> button.
ff The selected test pattern is displayed and the menu screen is disappeared.
Note
ff Press the <MENU> button to display the menu screen and select [Off] in [Test pattern] when you want to cancel the Test
pattern function.
[Network]
Initializes the settings of network before using the network function.
[Network setting]
1) Press as to select [Network].
2) Press the <ENTER> button.
ff The [Network] screen is displayed.
3) Press the <ENTER> button.
ff The [Network setting] screen is displayed.
4) Press as to select an item, and change the setting according to the instructions.
[DHCP]
[IP address]
[Subnet]
[Gateway]
[DNS]
[On]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[Off]:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP address], [Subnet] and [Gateway].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
5) Press as to select [Set], and press the <ENTER> button.
ff The following settings are set before the projector leaves the factory.
[DHCP]
[IP address]
[Subnet]
Off
192.168.1.100
255.255.255.0
[Gateway]
192.168.1.1
[DNS]
192.168.1.1
Note
ff Before using the DHCP server, make sure the DHCP server is already functioning.
ff Consult your network administrator regarding the IP address, Subnet and Gateway.
ENGLISH - 69