Download USER MANUAL

Transcript
OPA-391seies - User Manual
Assemblad s.r.l
8.2
PRINTER
To test the printer proceed as follows:
with the smoke meter switched off, press the FEED KEY, while keeping it pressed, switch
on the smoke meter using the ON/OFF key. The printer will send a message showing the
settings and available characters; when this message is completed it can resume normal
operations.
PAPER ROLL REPLACEMENT
To replace the paper roll make the following operations:
•
Open the printer door and push the holder of the printer mechanism were is written
PUSH.
•
Insert the end of the paper in the mouth of the printer mechanism and place the
paper roll, keep the right side as showed in figure.
•
The paper is dragged automatically for about 3 centimetres.
•
Cut the paper and close the door.
Warning: Before you insert
the roll paper please make
sure that the cut is regular.
ASSEMBLAD S.r.l. - Costruzioni Elettroniche - 50013 Campi Bisenzio - Firenze - Italy
Tel. 055-890485 - Fax. 055-890496 - E-mail: [email protected] - Web: www.assemblad.it
31