Download USER MANUAL

ENGLISH
5.6 DR1+ Configuration
SEARCH – allows to look for USB devices connected to PC.
RESET – this function resets the list of devices connected.
BYPASS DEVICE – temporarily bypasses DR1+ and allows DMX bridging. Press the “Esc” button to reactivate the
device.
SCAN NETWORK – scans all devices present in the network.
5.7 Devices list
After SCAN NETWORK or SEARCH have been launched, all devices present in the network are listed by ID.
The first column on the left shows the ID of each device, the second one shows the name of the device, the third one
shows the address, while the fourth column shows the status of the device that can be:
R – remote mode: the display of the device selected is reproduced or emulated on DR1 Lite Interface and allows the
navigation of the menu.
U – upload mode: the device selected is ready for upload.
D – download mode: the selected device is ready to tranfer the software on the PC.
One of the most important peculiarities of DR1+ that makes it a powerful management system, it’s the possibility to
operate simoultaneously on more devices. For example, you can perform software uploads/downaloads
simoultaneously on more LED devices, or turn lamps on on one or more fixtures, saving time and work.
To select multiple devices, as per any Windows application, keep the “Shift” or “Ctrl” buttons pressed and choose the
devices from the list with the mouse.
11