Download SDS2100 User Guide
Transcript
1: Introduction Features The SecureBox family of Secure Device Servers (SDS) allows serial devices such as those listed below to securely connect and communicate over Ethernet networks using the IP protocol family (TCP for connection-oriented stream applications and UDP for datagram applications). The SDS2100 Secure Device Server offers secure data communications using Rijndael Advanced Encryption Standards (AES) and are certified by the National Institute of Standard and Technology (NIST) to meet Federal Information Processing Standards (FIPS) required for data communication on US government and government contractor’s networks. Security Alarms Access Control Devices Fire Control Panels Time/Attendance Clocks and Terminals ATM Machines Data Collection Devices RFID readers Universal Power Supply (UPS) Management Units Telecommunications Equipment Data Display Devices Protocol Support The SDS uses the Internet Protocol (IP) for network communications and the Transmission Control Protocol (TCP) to assure that no data is lost or duplicated, and that everything sent to the connection arrives correctly at the target. Other supported protocols are listed below: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. TCP, UDP, and Telnet for connections to the serial port. TFTP for firmware updates. IP for addressing, routing, and data block handling over the network. 9