Download Operating Instructions

EASYCARE\SETTINGS
SERVICE
07/07
01/10
Load factory defaults
Melanin min runtime
>
> Reset: press `-` for 2s
> 1.. .20
These settings must only be made by
Loads the factory (default) settings.
trained service personnel!
Factory setting: Depending on the operator country
EASYCARE
SERVICE
02/03
02/10
PERSONAL PIN
Sensor-Check
> press ENTER
> 00000
Displays the current values during a melanin
measurement.
Submenu call
with START/ENTER.
This function is intended for sensor diagnosis to be
performed by qualified service staff!
SUBMENU
SERVICE\PERSONAL PIN
EASYCARE
03/03
Volume
01/01
ENTER SOLARIUM PERSONAL PIN
> PIN:
>
> 0 .. . 9
PERSONAL PIN activate / deactivate
Sets the volume of the easyCare voice-guidance
Enter your personal PIN.
system.
Factory setting: 4
UV-LEVEL
01/01
SET UV-LEVEL
>
SERVICE
03/10
FIRMWARE-TYP
> press enter
These settings must only be made by trained
service personnel!
34
Operating Instructions |
Submenu call with START/ENTER. Displays the
current firmware typ / variant.