Download Operating Instructions

Tubes
Figure 16
↵
4
• When installing the tubes, make sure that the
tube inscription is visible. If it is installed in
⑨
a different position, there will be no tanning
effect.
•
After new tubes have been installed, the operating hours of the tubes must be reset in
the service menu.
REMOVING TUBE
Figure 18
ⓑ
⑧
⑧
Reach into the rear ventilation gap positioned
⑨
Carefully pull the pane towards the front and
⇒
Deposit the pane in a safe place.
900
ⓐ
in the middle of the pane.
out of the tanning area.
TUBE REPLACEMENT IN THE BENCH PART
Figure 19
ASSEMBLY NOTE
Proceed in reverse order in order to re-install the
⑩
canopy pane. Make sure that the profil-guide is correctly positioned.
Figure 17
Page
39
When closing the canopy pane, make sure that
the profil-guide is correctly positioned.
Open the bench pane.
⑩
If the sunbed is equipped with an air-
⇒
Remove the tubes.
conditioning unit, remove the ducting pane.
O p e r a t i n g I n s t r u c t i o n s | Optima
41